MODEL S40 D - Central Version
Auxiliary Stage V Turbo-Diesel engine:
Electronic Engine Display:
Control and Safety devices for pump and engine:
Pump exhaust Silencer
Quick exchangeable Safety cartridge filter (filtering surface = 190.000 cm²), M class.
Cooling intake for Lobe pump with Cartridge Filters
Pump / Engine platform mounted on rubber elements.
Steel frame and insulated cabin with large inspection doors on both sides for an easy maintenance access.
IN ACCORDANCE WITH CURRENT RULES – “EC” CONFORMITY CERTIFICATE
CONTAINER WITH FILTERS 10 m³ Steel tank,
External reinforcement of the structure in order to resist the high vacuum.
Support standard platform made of rugged steel bars to host vacuum cleaner and tank.
Suction inlet on the side of the tank equipped with rapid coupling connector (for suction hoses Ø150)
Hydraulic pump connected to the main auxiliary engine and hydraulic circuit to lift the tank and open the back door. The discharge of the material is from the back door.
A hydraulic piston lifts the tank in the discharge position. One limit switch stops the container at the maximum angle. Also the back door is opened with the action of two hydraulic pistons.
Two automatic safety shuttings are placed on the back door to keep the door closed during the transport.
Fan level sensor for solids which stops automatically the vacuum unit when the tank is full.
Main pocket filter made of polyester inside the tank, surface = 300.000 cm².
Pneumatic cleaning system of the filter (REVERSE PULSE JET SYSTEM)
This system is suitable for fine dust and is activated automatically by a timer. It can be also controlled manually from the main control board. The dust removed from the filter is collected in a separate chamber (with fan level sensor) isolated from the main tank with a balancing door. This chamber is emptied automatically when the tank is lifted.
Side guards to place the hoses, tools and accessories.
Hazard light on the top of the tank
Mobile operator panel with cable to lift the tank and open the back door.
Painting process: sandblasting + 1 layer zinc primer + 2 layers epoxy paint. Colour: RAL ???.
Support standard platform
Supplied covered with metal sheets, it is ready for installation on truck/trailer having flat basement. To be fixed with bolts
Lockable Tool boxes on both sides of the platform.